How to Use Eye Mapping Stickers for Perfect Lash Placement

By False Eyelashes, Strip Lashes & Extensions | Published: 2026-10-28

Category: How-to Guides

Learn how to use eye mapping stickers to plan lash lengths and achieve symmetrical, customized lash looks every time.

Quick Answer

Eye mapping stickers let you mark lash lengths directly on the skin, so you can apply each lash exactly where it belongs — no more guessing or uneven eyes.

Why Use Eye Mapping Stickers Instead of Freehanding?

Freehand lash mapping relies on memory and can lead to asymmetrical results, especially when working on both eyes. Eye mapping stickers give you a physical guide that stays in place throughout the application, reducing the chance of uneven lengths or gaps.

The stickers are also reusable within a single session — you can write lengths on them and adjust as you go. This is especially helpful when you're creating a custom lash map for a client with asymmetrical eyes.

Step-by-Step: How to Use Eye Mapping Stickers

Step 1: Apply the Sticker Under the Eye: Peel one sticker from the pack and place it directly under your client's lower lash line, aligning the curved edge with the natural eye shape. Press down gently so it stays put. Common mistake: placing the sticker too high or too low. It should sit just below the lash line, not on the waterline or cheek.
Step 2: Mark Your Lash Lengths on the Sticker: Use a fine-tip pen or eyeliner to write the lash lengths you plan to use in each section of the sticker. For example, write '8mm' near the inner corner, '12mm' in the center, and '10mm' toward the outer corner. Checkpoint: write clearly and keep the numbers small so they don't obscure the sticker sections.
Step 3: Apply Lashes Following the Map: Starting from the inner corner, pick up each lash and place it on the natural lash line according to the length written on the sticker. Work section by section, referring back to the sticker to confirm you're using the correct length. Common mistake: skipping sections or mixing up lengths. Glance at the sticker after every 3-4 lashes to stay on track.
Step 4: Repeat on the Other Eye: Apply a fresh sticker under the other eye and repeat the same length markings. Use the first eye's map as a reference to keep both eyes symmetrical. Checkpoint: if your client has asymmetrical eyes, adjust the lengths on the second sticker slightly to balance the look — don't copy the first map exactly.
Step 5: Remove the Sticker and Check Your Work: Gently peel off the sticker from both eyes. Use tweezers to remove any adhesive residue. Then inspect the lash line for gaps or uneven sections and fill in as needed. Final check: run a clean spoolie through the lashes to blend them and confirm the overall shape matches your intended map.

Product Used in This Guide

Eye Mapping Stickers: Tatti Lashes Eye Mapping Stickers come with 70 pairs per pack and are designed to be placed under the eye to plan lash lengths. You can write the desired lash lengths directly on the sticker sections, making it easy to keep track of your lash map during application.
Eye Mapping Stickers