What makes these lashes look like liner
Subtle Liner Effect Individuals are cluster lashes with an L-Curl effect: the fibres hug your lash line before lifting outward, creating a naturally snatched, cat-eye finish. You can wear a couple of clusters on the outer corner for a subtle cat-eye moment, or apply them across the full lash line for extra definition and lift. The set contains 30 reusable cluster lashes in 12mm and 14mm lengths, and they are 100% customisable so you can build the intensity you want.
Because the effect comes from the curl and placement rather than a heavy strip band, these individuals work well for an everyday glam look with a little extra edge. They are also easy to layer and mix with other lash styles you already own.
Key facts before you start
- Subtle Liner Effect Individuals: Contains 30 reusable cluster lashes in 12mm and 14mm lengths. Enough clusters for multiple wears, and two lengths let you customise the shape.

Subtle Liner Effect Individuals - Subtle Liner Effect Individuals: L-Curl effect hugs the lash line before lifting for a cat-eye finish. This is the feature that creates the soft liner illusion without drawing a line.
- Subtle Liner Effect Individuals: Adhesive not included. You will need to supply your own lash adhesive, either a daily lash glue or Invisi-Lash.
- Subtle Liner Effect Individuals: Reusable with proper care. With cleaning and careful removal, you can wear the same clusters more than once.
How to apply with regular lash adhesive
Use this method for daily wear. The lashes can be placed on top of or underneath your natural lashes depending on your preference.
- 1. Loosen and lift the cluster: Using your fingers or tweezers, gently loosen and peel the lash from the tray. Grip the lash as close to the base as possible.
- 2. Add glue to the base: Coat the base of your cluster in a small amount of glue. Wait up to 60 seconds for the glue to go tacky before applying.
- 3. Place and secure: Hover the cluster into position, then gently lower and place the lash onto your lash line. Secure with tweezers and repeat on both eyes until complete.
- 4. Build your look: Continue to apply until you have achieved your desired look. For a subtle liner effect, focus on the outer corner; for more definition, apply across the full lash line.
How to apply with Invisi-Lash adhesive
Invisi-Lash is designed for longer wear (up to 7 days according to the product information). When using Invisi-Lash, individuals must be placed underneath the lash line. Work on one eye at a time.
Patch testing: before using Invisi-Lash, apply a small amount of the Bond to a small section of outer corner lashes and wait 24 hours. If you experience any reactions or sensitivity, discontinue use.
- 1. Prepare your natural lashes: Make sure your lashes are makeup and oil-free, and completely clean and dry. Do not apply mascara prior to using Invisi-Lash.
- 2. Apply Bond: Brush a light coat of Bond from the Invisi-Lash Adhesive on your natural lashes. Focus the adhesive where the base of the cluster will connect with your natural lashes. For a more dramatic cluster, you may need to take the adhesive further up the lash for a stronger hold. Wait 30 seconds for the bond to go tacky.
- 3. Pick up the cluster: Using your lash applicator, pick up your cluster from the end section of the lash (not the base). Make sure no adhesive is on the tweezer, as this will stick to the lash cluster. If you have glue on the tweezer, clean it off between applications.
- 4. Place underneath the lash line: Working in sections from either the outer or inner corner, place the cluster underneath your natural lashes, connecting the base of the cluster to the bonded area.
- 5. Seal and clamp: Only seal the lashes where you have applied the Bond, taking care to avoid the tips of the lash clusters. Be careful not to apply the cure all the way through the lash cluster as it can leave a residue and cause the clusters to go hard and clump together. When clamping, focus on the base of your natural lash line where the clusters are bonded to, as this ensures your lashes will not lift or move, giving a long-lasting finish.
Checkpoints for a clean, comfortable wear
- Keep tools clean: Wipe down your lash applicator so there isn't any black bond on it prior to clamping. Make sure your applicator does not have glue on it for an easy application.
- Avoid brushing the adhesive too high: You do not need to brush the adhesive all the way up your lash. Focus on the base where the cluster connects.
- Don't pull the wand through clusters: Do not brush or pull the wand through your lash clusters, as this can disturb the placement.
- Seal selectively: Only seal where you've applied the Bond, avoiding the tips. Too much cure can make clusters hard and clumpy.
Removal and reuse
Once you've removed your lashes, clean them thoroughly using the Lash Cleansing Kit. Allow the clusters to dry, and you can reuse them with Invisi-Lash adhesive or Strip Lash adhesive. With proper care, these individuals are reusable, so you can enjoy multiple wears from one set.
Placement tips for a natural liner look
For a soft eyeliner effect, start with two or three clusters on the outer corner, angling them slightly upward to follow the L-Curl. If you want more definition, add clusters toward the inner corner, but keep the longest lengths (14mm) at the outer edge for a lifted look. Because the lashes are 100% customisable, you can mix lengths and adjust the number of clusters to suit your eye shape. Remember that when using daily adhesive, you can place clusters on top of or underneath your natural lashes—experiment to see which feels most comfortable and blends best with your lash line.

